Stainless steel coiled tubing,  This product has great precautions in cutting, the following will be specific for us to introduce:

1, can choose mechanical or technical methods to cut the stainless steel coiled tubings;

2. Special grinding wheel should be used when cutting or repairing with grinding wheel;

3, should not use mechanical or plasma method incision;

4, carbon steel pipe, galvanized steel pipe should be cut with hacksaw or mechanical method;

5, the quality of the pipeline incision should meet the following requirements:

(1) The deviation of the end face of the incision should not be greater than 1% of the outer diameter of the pipeline, and should not exceed 3mm; The bump error must not exceed 1mm.

(2) The incision surface should be flat, without cracks, heavy skin, burrs, convex and concave, shrinkage, slag, oxide, iron filings, etc.;