EMHK is one of the best manufactures and exporters of Monel 500 component. In addition, flawless qualitative alloy products, including Coils, Strips, Shim, and Foils, are manufactured here at special metals.

Monel 500 products forms can be available in Coil, Strip, Foil, and shim of various profiles such as Round, Flat, Square. Also, Strip and Foil can be available in half and full hard temper. Furthermore, Monel 500 components can be hardened by cold working and by heat treating as well.

Composition of Monel 500 coil and foil:

The composition of the Monel 500 coil is nickel-copper alloy. In this 63% nickel and 28%, copper has consisted. Also, minimum carbon, manganese, silicon, sulphur, and iron are present in the composition.

Advantages of using Monel 500 shim and strip:

• High Strength
• Excellent Resistant
• Higher Mechanical Stress
• Resistant to Pressure
• Good Formality
• Resistive to Higher Temperature
• It is Reusable

These are the advantages of components such as shim, strips, coil, and foil made out of Monel 500.

MONEL K500 COIL / FOIL / SHIM / STRIP SPECIFICATION

Standards : ASTM B127 / ASME SB127
Coil Width : 3 mm and above

Shim Width : 3.2mm – 1500mm

Strip Coils Width : 250mm to 750 mm (Mill Edge) 5.0mm to 750 mm (Slit Edge)
Form : Coils, Foils, Rolls, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Thickness : 0.1mm to 12 mm Thk
Length : 500mm to 12000mm
Width : 100mm to 3000mm

CHEMICAL COMPOSITION OF MONEL K500 COIL / FOIL / SHIM / STRIP

MECHANICAL COMPOSITION OF MONEL K500 COIL / FOIL / SHIM / STRIP